Loading
Home
Article
22,793

FAQ: How do I use the Automatic Hold function in my BMW with Operating System 7?

Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when it is stationary. On uphill grades the system prevents the vehicle from rolling back when driving off. 



Under the following conditions, the parking brake is automatically engaged:

  • Drive-ready state is switched off.
  • The driver's door is opened while the vehicle is stationary.
  • The moving vehicle is brought to a standstill using the parking brake.

 

Establishing operational readiness of Automatic Hold

  1. Turn on drive-ready state.
  2. Press the "Auto H" button. The LED illuminates.

The indicator light illuminates green. Automatic Hold is ready to use. After every vehicle restart, the last selected setting is active.

Operational readiness is established and the driver's door is closed. After the brake is applied, the vehicle is kept from rolling away as soon as the indicator light illuminates green.

 

Driving off

Press the accelerator pedal to drive off. The brake is released automatically and the indicator light of the parking brake is no longer illuminated.

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    35,498

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    18,857

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    9,292

    With the Automatic Park Assistant, finding and securing a parking spot has never been easier. Press the Parking Assistant button located on your center console. Once activated, ...
    5,585

    The panoramic view gives you an earlier view of crossing traffic at blind driveway exits and intersections. Road users concealed by obstacles to the left and right of the vehi...
    22,704

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    22,538

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    15,326

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    14,067

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    12,161

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    12,114

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    11,515

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    10,152

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    10,081

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    9,148

    Perform the following in the iDrive menu to turn the Speed Limit Assistant on or off: "CAR" "Settings" "Driver Assistance" If necessary, "Driving" "Speed Limit Assistance" "Spe...
    9,141

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    8,822

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    8,462

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    7,443

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    7,411

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    7,349

    Radar and camera-based Active Cruise Control with Stop and Go (from MY24 on called Distance Control) allows you to set a desired cruising speed and how close you can get to the ...

BMW AI Assistant

0 / 200

Loading
Driver Assistance Systems | BMW FAQ