With the Automatic Maneuvering Assistant, included in the optimal equipment, Parking Assistant Professional, you can save up to 10 maneuvers with a combined distance of around 1960 ft and a maximum of around 650 ft for a single recording.
Perform the following on the center console to record a maneuver:
- Drive the vehicle to the starting point from which a maneuver must be recorded and stop.
- Press the Park Assistance button. The parking assistance systems view is displayed.
- "Record new path"
- Drive the vehicle to the desired end position. The maneuver is recorded.
- When recording a route, do not drive faster than 9 mph/15 km/h.
- While recording, the distance covered will be displayed.
- When the maximum distance covered or the maximum speed is reached, a message will be displayed and a signal tone will sound.
- Vehicle stationary: "Save recording".
- To assign a name to the recorded maneuver, tap the name.
- Enter a name and confirm.
- Save your selection and do not move the vehicle until the recording has been stored.
Performing Maneuver
Perform the following on the center console to use stored maneuvers:
- Drive the vehicle into the activation range and stop. The control display and instrument cluster indicate that a stored maneuver can be activated.
- Select 'activate stored maneuver' on the I-drive screen.
Green: after activation, the system takes control of the vehicle and performs the maneuver automatically. If applicable, follow the instructions on the control display or in the instrument cluster.
The speed can be reduced with the brake. Other interventions will cancel the system.
At the end of the parking operation, selector lever position P is set.
Link to watch BMW USA How-To video: How-To Use BMW Automatic Maneuvering Assistant | BMW USA Genius
