Loading
Home
Article
573

How do I activate, deactivate, and adjust the Speed Limit Assistant in my BMW with BMW Operating System 8.5?

Perform the following in the iDrive menu to turn the Speed Limit Assistant on or off:

 

For BMW Operating System 8.5:

    1. Apps menu
    1. "Vehicle"
    1. "Driving settings"
    1. "Driver Assistance"
    1. "Driving"
    1. "Speed Limit Assistance"
    1. "Speed limits"

    Select the desired setting:

    • "Adjust manually": detected speed limits can be applied manually.
    • "Show current limit": current speed limits are displayed without being applied in the instrument cluster.
    • "Off": depending on the national-market version, Speed Limit Info and Speed Limit Assistant will be turned off. If necessary, other anticipatory comfort functions will be turned off.

     

     

    To set the speed adjustment select follow steps 1 through 6 and then select the desired setting:

    • "Adjust speed limits": set the tolerance for speed adjustments, which applies to all speed limits.
    • "2nd adjustm. up to": activate or deactivate additional speed adaptation.
    • "Adjust speed limits": with activated additional speed adjustment, set the tolerance for speed limits up to 40 mph/60 km/h.

     

    Technologies & Innovations
    Models & Equipment
    Was this article helpful?

    Recommended articles

      22,862

      To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
      22,536

      To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
      15,332

      Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
      14,054

      Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
      35,357

      Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
      22,825

      Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
      18,883

      If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
      12,175

      The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
      12,175

      The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
      11,558

      Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
      10,161

      The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
      10,084

      Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
      9,246

      With the Automatic Park Assistant, finding and securing a parking spot has never been easier. Press the Parking Assistant button located on your center console. Once activated, ...
      9,150

      Perform the following in the iDrive menu to turn the Speed Limit Assistant on or off: "CAR" "Settings" "Driver Assistance" If necessary, "Driving" "Speed Limit Assistance" "Spe...
      9,145

      The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
      8,816

      Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
      8,459

      Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
      7,458

      The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
      7,436

      The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
      7,338

      Radar and camera-based Active Cruise Control with Stop and Go (from MY24 on called Distance Control) allows you to set a desired cruising speed and how close you can get to the ...

    BMW AI Assistant

    0 / 200

    Loading
    Driver Assistance Systems | BMW FAQ