Loading
Home
Article
10222

How do I turn the car wash view on or off in my vehicle?

The car wash view assists you when driving into car washes. You can use the display to position your vehicle correctly in the guide rails of the car wash.

Depending on the BMW Operating System in your vehicle, perform the following steps to reset the BMW Digital Key function.

 

In BMW Operating System 7, the car wash view can be selected using the left toolbar to display your own lane, making it easier to operate your BMW through the car wash.

 

In BMW Operating System 8, you can access the car wash view by pressing the Parking Assistant button and then selecting "car wash".

 

In BMW Operating System 8.5 and BMW Operating System 9, you can perform the following on the center console to turn the car wash view on or off:

  1. Press the Park Assistance button.
  2. Select "More"
  3. Select "Car wash view"

To exit the car wash view, select a different camera view in the left toolbar.

Your own lane is displayed for easier driving into a car wash. This view can be used to position the vehicle correctly within the washing system guide rails.

In a car wash, the vehicle must be able to roll freely forward.

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    78909

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    76476

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    62647

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    26227

    The system switches on automatically in the following situations: ▷ With the engine running, when selector lever position R is engaged. ▷ While approaching detected obstacles at...
    218453

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    115765

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    114342

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    65997

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    64978

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    63262

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    63020

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    47164

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    41707

    The Speed Limit Info in your BMW with Operating System 7 gives a visual warning and if necessary an acoustic warning if you exceed the speed limit. It can be deactivated for the...
    40145

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    39344

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    39181

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    37309

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    36008

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    35825

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    34975

    Assisted Driving Mode Plus helps drivers guide their vehicle through traffic jams. Supporting steering movements take place without the driver actively steering. The system uses...

BMW AI Assistant

0 / 200

Loading
Driver assistance systems | BMW FAQ