Launch Control enables optimum acceleration on roads with good traction under dry surrounding conditions.
The use of Launch Control causes premature component wear since this function represents a very heavy load for the vehicle.
- Do not use Launch Control during the break-in.
- Do not steer the steering wheel when driving off with Launch Control.
Functional requirements
Launch Control is available when the engine is at operating temperature. The engine is at operating temperature after an uninterrupted trip of at least 6 miles/10 km.
In addition, one of the following prerequisites must be met:
- M Dynamic Mode activated.
- Dynamic Stability Control deactivated.
Starting with launch control
- Turn on drive-ready state.
- With your left foot, forcefully press down on the brake.
- Press and hold down the accelerator pedal beyond the resistance point at the full throttle position, kickdown.
- A destination flag is displayed in the instrument cluster.
- Keep the accelerator pedal in this position.
- The starting engine speed adjusts. Release the brake as soon as a flag symbol is shown on the instrument cluster, or within 3 seconds of the flag symbol appearing. The vehicle accelerates.
The vehicle upshifts automatically, even in sequential mode, as long as the destination flag is displayed and the accelerator pedal is not released.
Repeated use during a trip: After Launch Control has been used, it is necessary to drive a certain distance before Launch Control can be used again. Launch Control adjusts to the surrounding conditions, when used again.
After using Launch Control: To support driving stability, reactivate Dynamic Stability Control as soon as possible.
System limits: An experienced driver may be able to achieve better acceleration values in DSC OFF mode.
