Loading
Home
Article
1,119

Why does the Back-up Assistant in my BMW turn off automatically?

The system automatically cancels in situations such as the following:

▷ When the driver grasps the steering wheel or takes over steering.

▷ When shifting from reverse to another selector lever position.

▷ During activation or intervention by driver assistance systems.

▷ After an extended period of time when the vehicle is stationary.

▷ When exiting the stored lane when reversing, for instance with maximum steering wheel angle.

▷ When the view on the control display is overlaid with messages.

▷ In case of a slippery surface.

 ▷ When the vehicle is rolling, such as on a slope.

▷ In case of changed ambient conditions.

▷ If the vehicle speed exceeds approx. 6 mph/9 km/h. 

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    35,615

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    22,783

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    18,854

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    9,322

    With the Automatic Park Assistant, finding and securing a parking spot has never been easier. Press the Parking Assistant button located on your center console. Once activated, ...
    22,610

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    22,537

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    15,333

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    14,090

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    12,157

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    12,096

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    11,506

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    10,157

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    10,091

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    9,146

    Perform the following in the iDrive menu to turn the Speed Limit Assistant on or off: "CAR" "Settings" "Driver Assistance" If necessary, "Driving" "Speed Limit Assistance" "Spe...
    9,134

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    8,832

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    8,472

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    7,443

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    7,405

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    7,355

    Radar and camera-based Active Cruise Control with Stop and Go (from MY24 on called Distance Control) allows you to set a desired cruising speed and how close you can get to the ...

BMW AI Assistant

0 / 200

Loading
BMW driver assistance systems | BMW FAQ