Loading
Home
Article
708

How do I set the strength of the steering intervention of the Lane Departure Warning in my BMW with BMW Operating System 8?

Setting the intensity of the steering wheel vibration:

  1. Apps menu
  2. "Vehicle apps"
  3. "Driving settings"
  4. "Driver Assistance"
  5. "Feedback via steering wheel"
  6. "Vibration intensity"
  7. Select the desired setting. The setting is applied to all collision warning systems. 
Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    22,343

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    22,106

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    14,641

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    13,275

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    33,487

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    22,200

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    18,796

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    12,178

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    11,265

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    11,167

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    10,986

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    9,435

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    9,148

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    8,404

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    8,021

    Perform the following in the iDrive menu to turn the Speed Limit Assistant on or off: "CAR" "Settings" "Driver Assistance" If necessary, "Driving" "Speed Limit Assistance" "Spe...
    7,812

    Radar and camera-based Active Cruise Control with Stop and Go (from MY24 on called Distance Control) allows you to set a desired cruising speed and how close you can get to the ...
    7,578

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    7,300

    With the Automatic Park Assistant, finding and securing a parking spot has never been easier. Press the Parking Assistant button located on your center console. Once activated, ...
    7,215

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    7,113

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...

BMW AI Assistant

0 / 200

Loading
BMW driver assistance systems | BMW FAQ