Loading
Home
Article
18120

How can I save a driving speed in my BMW that my BMW automatically observes?

With the Cruise Control in your BMW, you can select a desired driving speed, which your BMW stores and automatically adheres to, as long as you do not intervene correctively.

To save the driving speed in your BMW with BMW Operating System 8, press the "SET" button on the steering wheel. You can set speed with the "-/+" button. 

To save or change a driving speed in your BMW with BMW Operating System 7, press the rocker switch on the steering wheel up or down repeatedly until the desired speed is set. Each tap of the rocker is switch up to the resistance point increases or decreases the driving speed by 1 mph. Each time the rocker switch is pressed beyond the resistance point, the driving speed changes by a max of 5 mph display in the speedometer. 

 

If, while driving, you set a driving speed that is lower than the speed currently being driven, the vehicle will coast to the set driving speed. You can override Cruise Control at any time by accelerating or braking. If you brake, you must activate the Cruise Control again. Pressing the "RESUME"/"RES" key on the steering wheel resumes the last saved speed.

 

Please Note: Models with Active Cruise Control will automatically reduce speed to maintain a selected distance from a vehicle in front. 

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    218843

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    116150

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    114623

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    66284

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    79428

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    77252

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    65160

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    63558

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    63226

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    63031

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    47574

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    41755

    The Speed Limit Info in your BMW with Operating System 7 gives a visual warning and if necessary an acoustic warning if you exceed the speed limit. It can be deactivated for the...
    40413

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    39532

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    39351

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    37480

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    36179

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    36055

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    35109

    Assisted Driving Mode Plus helps drivers guide their vehicle through traffic jams. Supporting steering movements take place without the driver actively steering. The system uses...
    34447

    If the function is limited, either no warning may be issued or an unwarranted warning may be issued. The Fatigue Alert in your BMW may become limited in the following situations...

BMW AI Assistant

0 / 200

Loading
BMW driver assistance systems | BMW FAQ