Loading
Home
Article
22,791

How do I activate the Automatic High Beam Assistant in my BMW?

To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lever towards the high-beam headlight. For vehicles without a rotary switch, activate the high beams by pressing the lower side button on the turn signal/high beam lever.
Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    23,131

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    15,224

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    13,751

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    12,657

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    34,870

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    23,102

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    19,542

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    11,739

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    11,727

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    11,383

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    9,977

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    9,595

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    8,659

    Perform the following in the iDrive menu to turn the Speed Limit Assistant on or off: "CAR" "Settings" "Driver Assistance" If necessary, "Driving" "Speed Limit Assistance" "Spe...
    8,651

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    8,085

    Radar and camera-based Active Cruise Control with Stop and Go (from MY24 on called Distance Control) allows you to set a desired cruising speed and how close you can get to the ...
    7,917

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    7,898

    With the Automatic Park Assistant, finding and securing a parking spot has never been easier. Press the Parking Assistant button located on your center console. Once activated, ...
    7,618

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    7,366

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    7,158

    The cameras and sensors of your BMW must function perfectly even in rain, mud and snow. For this reason, cleaning technology is installed in the Rear View Camera. When the rear ...

BMW AI Assistant

0 / 200

Loading
BMW driver assistance systems | BMW FAQ