Loading
Home
Article
1224

How do I adapt the speed of my vehicle with BMW Operating System 8.5 or BMW Operating System 9 to the route layout?

The system can be configured so that with active distance control, the vehicle adapts the speed automatically to the route.

For instance, the speed will be reduced in the following situations as necessary:

  • Before making turns.
  • Before a roundabout.
  • Before a curve.
  • In front of an exit ramp on highways or highway-like roads.

Depending on which BMW Operating System your vehicle is equipped with, perform the following to automatically adapt the speed to the route: 

BMW Operating System 9:

  1. Go to the Apps menu
  2. "Vehicle"
  3. "Driving settings"
  4. "Driver Assistance"
  5. "Driving"
  6. "Route speed control"
  7. "Adjust speed automatically"

 

BMW Operating System 8.5:

  1. Go to the Apps menu
  2. "Vehicle"
  3. "Driving settings"
  4. "Driver Assistance"
  5. "Driving"
  6. "Route and intersection assistant"
  7. "Automatically adjust speed to route"

 

Depending on which BMW Operating System your vehicle has, perform the following to adjust the corning speed: 

BMW Operating System 9:

  1. Go to the Apps menu
  2. "Vehicle"
  3. "Driving settings"
  4. "Driver Assistance"
  5. "Driving"
  6. "Route speed control"
  7. "Cornering speed"
  8. Select the desired setting. 

 

BMW Operating System 8.5:

  1. Go to the Apps menu
  2. "Vehicle"
  3. "Driving settings"
  4. "Driver Assistance"
  5. "Driving"
  6. "Route and intersection assistant"
  7. "Cornering speed"
  8. Select the desired setting. 
Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    218040

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    115283

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    114024

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    65674

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    78356

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    75650

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    64813

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    62995

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    62726

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    62282

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    46759

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    41660

    The Speed Limit Info in your BMW with Operating System 7 gives a visual warning and if necessary an acoustic warning if you exceed the speed limit. It can be deactivated for the...
    39921

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    39167

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    39012

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    37114

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    35835

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    35653

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    34822

    Assisted Driving Mode Plus helps drivers guide their vehicle through traffic jams. Supporting steering movements take place without the driver actively steering. The system uses...
    34259

    If the function is limited, either no warning may be issued or an unwarranted warning may be issued. The Fatigue Alert in your BMW may become limited in the following situations...

BMW AI Assistant

Hello, I’m your BMW AI Assistant. I’m powered by artificial intelligence to help you anytime.

0 / 200

Loading
Driver assistance systems | BMW FAQ