Loading
Home
Article
3489

How do I change the Active Blind Spot Detection settings in my vehicle with BMW Operating System 7?

Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane.

The warning light in the exterior mirror warns the driver whether there are vehicles in your blind spot or approaching from behind in an adjacent lane. 

 

For vehicles equipped with BMW Operating System 7:

Perform the following to set the warning time:

  1. "CAR"
  2. "Settings"
  3. "Driver Assistance"
  4. "Safety and Warnings"
  5. "Active Blind Spot Detection"
  6. Select the desired setting.

 

Perform the following to set intensity of the steering wheel vibration:

  1. "CAR"
  2. "Settings"
  3. "Driver Assistance"
  4. "Steering Wheel Feedback"
  5. "Vibration intensity"
  6. Select the desired setting.

 

The setting is applied to all Intelligent Safety systems.

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    218721

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    116071

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    114540

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    66187

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    79297

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    77051

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    65122

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    63490

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    63161

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    62897

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    47437

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    41740

    The Speed Limit Info in your BMW with Operating System 7 gives a visual warning and if necessary an acoustic warning if you exceed the speed limit. It can be deactivated for the...
    40323

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    39488

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    39288

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    37437

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    36129

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    35979

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    35058

    Assisted Driving Mode Plus helps drivers guide their vehicle through traffic jams. Supporting steering movements take place without the driver actively steering. The system uses...
    34409

    If the function is limited, either no warning may be issued or an unwarranted warning may be issued. The Fatigue Alert in your BMW may become limited in the following situations...

BMW AI Assistant

0 / 200

Loading
Driver assistance systems | BMW FAQ