Launch Control enables optimum acceleration on roads with good traction under dry surrounding conditions. The use of Launch Control causes premature component wear since this function represents a very heavy load for the vehicle. Do not use Launch Control during the break-in. Do not steer the steering wheel when driving off with Launch Control. Launch Control is available when the engine is at operating temperature. The engine is at operating temperature after an uninterrupted trip of at least 6 miles/10 km.
Starting with launch control:
- Turn on drive-ready state.
- Deactivate the Dynamic Stability Control.
- Select sequential mode with gear 1 and Drivelogic program S3.
- With your left foot, forcefully press down on the brake.
- Press and hold down the accelerator pedal beyond the resistance point at the full throttle position, kickdown. A destination flag is displayed in the instrument cluster. Keep the accelerator pedal in this position.
- The starting engine speed adjusts. Within 3 seconds, release the brake. The vehicle accelerates.
Upshifting occurs automatically as long as the destination flag is displayed and the accelerator pedal is not released.
