Launch Control enables optimum acceleration on roads with good traction under dry surrounding conditions. Using Launch Control causes premature component wear since this function represents a very heavy load for the vehicle. Do not turn the steering wheel when driving off with Launch Control. Do not use Launch Control when breaking in the vehicle. Launch Control can be used when the engine is at operating temperature. The engine is at operating temperature after an uninterrupted trip of at least 6 miles/10 km.
Driving off with Launch Control:
- Turn on drive-ready state.
- Press the button "OFF".
- Activate TRACTION on the Control Display.
- Engage selector lever position S.
- With the left foot, press down forcefully on the brake.
- Press and hold down the accelerator pedal beyond the resistance point at the full throttle position, kickdown. A destination flag is displayed in the instrument cluster.
- The starting engine speed adjusts. Wait briefly until the engine speed is constant. Keep the accelerator pedal in this position.
- Release the brake within 3 seconds after the destination flag illuminates. The vehicle accelerates. Upshifting occurs automatically as long as the destination flag is displayed and the accelerator pedal is not released.
After using Launch Control: To support driving stability, reactivate Dynamic Stability Control as soon as possible.
