Loading
Home
Article
1002

How do I use 3D view in my vehicle with BMW Operating System 8 and newer?

With 3D view, a circle is displayed around the vehicle top view in the selection window. Specified perspectives can be selected on the circle.

Depending on which BMW Operating System your vehicle is equipped with, perform the following on the center console to activate 3D view: 

 

BMW Operating System 8
    1. Press the "Park Assist" button
    2. Select "3D view" in the menu
        To exit the 3D view, select another camera view on the left toolbar.

 

BMW Operating System 8.5 and BMW Operating System 9
    1. Press the "Park Assist" button
    2. Select "More"
    3. Select "3D view" 
        To exit the 3D view, select another camera view on the left toolbar.

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    79522

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    77359

    Parking Assistant includes Back-up Assistant, a rearview camera, Active PDC (Park Distance Control), side protection, parking-drive-off monitoring and an emergency braking funct...
    63108

    If reverse gear is engaged, the mirror glass on the passenger's side is tilted downward. This improves your view of the curb and other lowlying obstacles when parking, for insta...
    26230

    The system switches on automatically in the following situations: ▷ With the engine running, when selector lever position R is engaged. ▷ While approaching detected obstacles at...
    218911

    To deactivate the Lane Keeping Assistant in your BMW with BMW iDrive Operating System 7, select the following in the BMW iDrive operating system: "CAR" "Settings" "Driver Assist...
    116202

    To activate the Automatic High Beam Assistant in your BMW, turn the light switch to switch position 3 (automatic). Then, with the low beams on, tap the turn signal/high beam lev...
    114660

    The speed warning can be used to set a speed limit. A warning will be issued when this speed limit is exceeded. Activating/deactivating the speed warning: Apps menu "Vehicle ...
    66345

    Forward collision mitigation with brake intervention in your BMW is intended to prevent collisions and reduce the severity of an accident. The driver assistance system consists ...
    65177

    The Forward Collision Mitigation can help prevent accidents. If an accident cannot be avoided, the system helps reduce the severity of the accident. The system can issue a warni...
    63597

    The Lane Change Assistant in your BMW also supports you when changing lanes on multi-lane roads. Perform the following to turn the Lane Change Assistant in your BMW with Oper...
    63285

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror gives warnings ...
    47650

    Automatic Hold assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when i...
    41764

    The Speed Limit Info in your BMW with Operating System 7 gives a visual warning and if necessary an acoustic warning if you exceed the speed limit. It can be deactivated for the...
    40451

    Active Blind Spot Detection detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. The warning light in the exterior mirror warns the drive...
    39568

    The Check Control system monitors functions in the vehicle and notifies you of faults in the monitored systems. A Check Control message is displayed as a combination of indicato...
    39367

    Speed Limit Assistant detects when a speed limit changes and allows you to automatically or manually adopt the new speed limit as your new set speed for functions such as the Dy...
    37506

    The Lane Change Assistant is a subfunction of the Steering Assistant in your BMW. It supports safely changing lanes, i.e., detecting vehicles in neighboring lanes and performing...
    36202

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    36083

    Display in the instrument cluster: Indicator light illuminates green: System is switched on. A lane boundary has been detected on at least one side of the vehicle and the system...
    35127

    Assisted Driving Mode Plus helps drivers guide their vehicle through traffic jams. Supporting steering movements take place without the driver actively steering. The system uses...

BMW AI Assistant

Hello, I’m your BMW AI Assistant. I’m powered by artificial intelligence to help you anytime.

0 / 200

Loading
Driver assistance systems | BMW FAQ